Synthesis of rubber modified epoxy resin: Corrosion, Abrasion and Thermal resistance studies

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 307

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISPST12_585

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

Epoxy terminated polybutadiene (ETPB) resin with good toughening properties was synthesized. The effect of modification into the abrasion and corrosion protection performances of the resulted modified coating compared to the original epoxy coating. Pendulum hardness showed incorporation of rubber into epoxy increased energy damping. Taber experiment showed that rubber modification increased abrasion resistance of epoxy coating. The corrosion protection performances of coatings were evaluated using electrochemical impedance spectroscopy (EIS) in 3.5% sodium chloride solution for a period of 90 days. EIS studies showed both coatings acted as intact coatings with good corrosion resistance properties. After 90 days of immersion, coating resistance of unmodified and rubber modified epoxy coatings did not have very difference and reached to 2.59×1010 Ω.cm2 and 2.70×1010 Ω.cm2, respectively. The addition of hydrophobic rubber into epoxy increased water contact angle from 77° to 85°. This increment in hydrophobicity decreased the water uptake of modified epoxy coating, too.

نویسندگان

Hossein Yahyaei

Polymer Engineering and Color Technology Department, Amirkabir University of Technology,Tehran, Iran

Morteza Ebrahimi

Polymer Engineering and Color Technology Department, Amirkabir University of Technology,Tehran, Iran

Hamed Vakili Tahami

Polymer Engineering and Color Technology Department, Amirkabir University of Technology,Tehran, Iran

Ehsan R Mafi

Polymer Engineering and Color Technology Department, Amirkabir University of Technology,Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Riew C.K., Gilllam J.K. (Eds.), Advances in Chemistry Series 208, ...
  • Abadyan M., Bagheri R., Kouchakzade) M.A., Fracture toughness of a ...
  • th l terhationa semlar _ Polymer sclence _ Technology 2-5 ...
  • نمایش کامل مراجع