Effect of nanoclay and process parameters on weld strength and seam width for CO2 laser welding of polypropylene - clay nanocomposite
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 299
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISPST12_251
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
In the present research, the tensile strength and seam width of butt welds in CO2 laser welding of polypropylene-clay nanocomposite are investigated. Polypropylene-clay nanocomposite sheets with 0 wt%, 3 wt% and 5 wt% nanoclay are welded to determine the effect of clay content and process parameters such as laser power, welding speed and focal position on weld tensile strength and seam width. According to the obtained results, as amount of nanoclay increases, the weld strength and weld seam width decrease. As a result, in samples with 0%, 3%, and 5% clay, the weld strength was found to be 94%, 58%, and 42% of base material, respectively. Increase in laser power increases the strength and width of the welds but increases in welding speed decreases the welds strength and width
کلیدواژه ها:
نویسندگان
M.R Nakhaei
Faculty of Mechanical Eng., Shahid Rajaee Teacher Training University, Tehran
N.B Mostafa Arab
Faculty of Mechanical Eng., Shahid Rajaee Teacher Training University, Tehran
G Naderi
Iran Polymer and Petrochemical Institute, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :