The investigation of corrosion resistance for pearlitic Co-Cr-Mo-C biomedical alloy in simulated body fluid
- سال انتشار: 1395
- محل انتشار: سیزدهمین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران
- کد COI اختصاصی: SCMEMI13_083
- زبان مقاله: انگلیسی
- تعداد مشاهده: 511
نویسندگان
Amirkabir University of Technology,
Associate Professor of Amirkabir University of Technology
چکیده
Toxicity of metallic ions in human body, as consequence of biomaterial corrosion, is one of the most important health concerns in which many researches on widely used biomaterials has been performed so far. Co-Cr-Mo-C biomedical alloy is employed for manufacturing of knee and hip joint prostheses as well as dentistry. The aim of this research is to investigate the corrosion resistance of heat treated Co-Cr-Mo-C biomedical alloy contained the microstructure of full pearlite-like HCP phase, in simulated body fluid (SBF). In this study, metallographic observation, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were utilized to characterize the Co-Cr-Mo-C alloy after heat treating, in simulated body fluid. Absence of passive layer on the surface of heat treated alloy was observed in the potentiodynamic curve. However, the rate of corrosion reactions occurring on the metallic surface increased slightly due to carbide formation. Current density (corrosion rate) moved from 1.549 μA cm-2 to 1.862 μA cm-2. EIS results showed that the redox reactions were charge transfer controlled and 94% increase in improvement efficiency of corrosion resistance (η), enhancement in resistance from 303.1 Ω to 5180 Ω, was caused by carbide precipitation on the preferred sites (HCP phase).کلیدواژه ها
Co-Cr-Mo-C biomedical alloy, corrosion resistance, simulated body fluid (SBF), electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, pearlitic HCP phaseمقالات مرتبط جدید
- Evaluating the Impact of Metal Microparticle Material and Size on theShear Strength of Aluminum/Adhesive/Aluminum Sheets
- بررسی انحلال کانی کالکوپیریت از کنسانتره مجتمع مس سرچشمه با استفاده از آکوارجیا آلی
- Molecular dynamic Simulation of ternary Cu۴۶Zr۴۶Al۸ bulkmetallic glass
- رویکردی نوین در بازیافت ضایعات صنعتی آلیاژ تیتانیوم با استفاده از آلیاژسازی مکانیکی
- شستشوی هیدرومتالورژی غبارهای کورههای ذوب جهت تعیین غبار بهینه لیچ مس
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.