Design and manufacturing of new a fire retardant coating system for polymer composites
- سال انتشار: 1394
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH03_008
- زبان مقاله: انگلیسی
- تعداد مشاهده: 662
نویسندگان
Professor Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran
M.Sc. Student,Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran
چکیده
The purpose of this study is manufacturing of a coating system for protecting polymer composites against the direct flame. The main effort was focused on production of an optimum composition for the coating system which is also supposed to reduce the amount of heat transfer to the composite substrate. Moreover, it is worth mentioning that the temperature of the rear of the coated surface of composites should not exceed of 125 ℃ in 30 minutes. Investigations have been done for two systems; water based and resin based coating systems. Fire tests results illustrated that the resin based coating systems have a higher resistance than the water based one. The resin based coating system consists of intumescent and metal hydroxide coating systems. Fire tests have been done for three coating systems; intumescent coating system, metal hydroxide coating system and a combination these two systems. Results revealed that the combination of the two coating systems (made of intumescent and metal hydroxide coating systems) has the best performance against fire.کلیدواژه ها
Fire, Polymer composites, Fire retardant coating, Fire-resistant materialمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.