A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample

  • سال انتشار: 1391
  • محل انتشار: مجله بین المللی معدن و مهندسی زمین، دوره: 46، شماره: 2
  • کد COI اختصاصی: JR_IJMGE-46-2_002
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 532
دانلود فایل این مقاله

نویسندگان

M Noaparast

School of Mining Engineering, University College of Engineering, University of Tehran

S Rahmati

School of Mining Engineering, University College of Engineering, University of Tehran

G Jozanikohan

School of Mining Engineering, University College of Engineering, University of Tehran

S Aslani

School of Mining Engineering, University College of Engineering, University of Tehran

چکیده

It is always attempted to reduce the costs of comminution in mineral processing plants. One of thedifficulties in size reduction section is not to be designed properly. The key factor to design size reductionunits such as crushers and grinding mills, is ore’s work index. The work index, wi, presents the oregrindability, and is used in Bond formula to calculate the required energy. Bond has defined a specificrelationship between some parameters which is applied to calculate wi, which are control screen, fineparticles produced, feed and product d80.In this research work, a high grade copper sample from Miduk copper concentrator was prepared, and itswork index values were experimentally estimated, using different control screens, 600, 425, 212, 150, 106and 75 microns. The obtained results from the tests showed two different behaviors in fine production.According to these two trends the required models were then defined to present the fine mass calculationusing control screen. In next step, an equation was presented in order to calculate Miduk copper ore workindex for any size. In addition to verify the model creditability, a test using 300 microns control screenwas performed and its result was compared with calculated ones using defined model, which showed agood fit. Finally the experimental and calculated values were compared and their relative error was equalto 4.11% which is an indication of good fit for the results.

کلیدواژه ها

Modeling, Work Index, Miduk Copper, Control Screen, Bond Ball Mill

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.