Detectivity of YBCO Transition Edge Bolometer as a Function of Chopping Frequency, Bias Current and Coating
محل انتشار: شانزدهمین کنفرانس مهندسی برق ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,217
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE16_347
تاریخ نمایه سازی: 6 اسفند 1386
چکیده مقاله:
Bolometric response and noise characteristics of YBCO superconductor transition edge IR detectors with relatively sharp transition and its resulting detectivity are investigated. The magnitude of response of a device was obtained in different bias currents and modulation frequencies. Also dependency of intrinsic noise of the device with respect to the bias temperature in the vicinity of critical temperature was studied for various values of bias currents and chopping frequencies. Having measured the bolometric response and noise characteristics, we found the device detectivity versus frequency in different bias currents and analyzed the results. We also improved the detectivity of the device by increasing surface absorptance using a novel infrared absorber, which is made of a Copper-Carbon composite, coated in a low temperature process. Within the modulation frequency range studied in this investigation, comparison of device responsivity before and after the coating is also presented.
کلیدواژه ها:
نویسندگان
Ali Moftakharzadeh
Sharif University
Alireza Kokabi
Sharif University
Ali Bozbey
Nagoya University
Tayebeh Ghods-Elah
Sharif University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :