An attenuation Layer for Electromagnetic Shielding in X- Band Frequency
- سال انتشار: 1394
- محل انتشار: فصلنامه بهداشت، ایمنی و محیط زیست، دوره: 2، شماره: 2
- کد COI اختصاصی: JR_IJHSE-2-2_004
- زبان مقاله: انگلیسی
- تعداد مشاهده: 767
نویسندگان
Department of Occupational Health, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran.
Department of Occupational Health, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran.
Department of Occupational Health, Faculty of Medical Sciences, Tarbiat Modares University, Tehran, Iran.
چکیده
Uncontrolled exposure to X-band frequency leads to health damage. One of the principles of radiation protection is shielding. But, conventional shielding materials have disadvantages. Therefore, studies of novel materials, as an alternative to conventional shielding materials, are required to obtain new electromagnetic shielding material. Therefore, this study investigated the electromagnetic shielding of two component epoxy thermosetting resin for the X - band frequency with workplace approach. Two components of epoxy resin mixed according to manufacturing instruction with the weight ratio that was 100:10 .Epoxy plates fabricated in three different thicknesses (2, 4 and 6mm) and shielding effectiveness measured by Vector Network Analyzer. Then, shielding effectiveness measured by the scattering parameters.The results showed that 6mm thickness of epoxy had the highest and 2mm had the lowest average of shielding effectiveness in X-band frequency that is 4.48 and 1.9 dB, respectively. Also, shielding effectiveness increased by increasing the thickness. But this increasing is useful up to 4mm. Percentage shielding effectiveness of attenuation for 6, 4 and 2mm thicknesses is 64.35%, 63.31% and 35.40%. Also, attenuation values for 4mm and 6mm thicknesses at 8.53 GHz and 8.52 GHz frequency are 77.15% and 82.95%, respectively, and can be used as favourite shields for the above frequency. 4mm-Epoxy is a suitable candidate for shielding application in X-band frequency range but, in the lower section, 6mm thickness is recommended. Finely, the shielding matrix can be used for selecting the proper thickness for electromagnetic shielding in X- Band frequencyکلیدواژه ها
Epoxy, Microwave, Electromagnetic Shielding, radiation protection, X-band frequency, half-value layerمقالات مرتبط جدید
- شناسایی و اولویت بندی توانمندسازهای تاب آوری در زنجیره تامین بخش بهداشت و درمان
- نقش فناوری های دیجیتال در پیشگیری و مدیریت اختلالات روانی: چالشها و فرصتها: یک بررسی مروری
- Effects of ozone concentration in combination with ultrasound irradiation on the reduction of residual daizinon and chlorpyrifos on tomato (Solanum Lycopersicum L.)
- نقش روغنهای طبیعی و رازهای مراقبت از پوست: بررسی خواص و مزایا
- تحلیل علمی اثرات ماساژ بر سیستم ایمنی بدن: بررسی مکانیزمها و نتایج بالینی
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.