Physical and mechanical properties of aluminium composite reinforced with SIC and Clay and combination of both
محل انتشار: کنفرانس بین المللی پژوهش در علوم و تکنولوژی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 631
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CRSTCONF01_165
تاریخ نمایه سازی: 27 اسفند 1394
چکیده مقاله:
In the industry today, the need to produce of light components with lower cost, increases the use of composite materials. Therefore, in this study, the properties of aluminium Nano-composite reinforced with 5, 10 and 15 WT% Sic and Clay nanoparticles and combination of both, with the production method of powder metallurgy is investigated. The pressure is 400 Mpa and the sinter temperature of produced specimens is 600 C. finally in order to identify the physical and mechanical behaviours of the produced Nano-composites, various tests have been taken place to verify density, hardness, tension and compressive strength. Also the micro structure is specified by electronic microscope (SEM). The results show that the behavior and properties of Nano-composites depend on the type and also the percentage of reinforcing. Silicon carbide Nano-composite for example has the highest hardness and compressive strength, clay Nano- composite, has the lowest porosity and highest percentage of increase of the length and composition of Nano-composite silicon carbide and clay has the lowest density and also the highest tensile strength
کلیدواژه ها:
نویسندگان
Parastoo Heydarizadeh
Graduate student of Mechanical Engineering, University of Tehran, Tehran, Iran
Mahmood Mosavi Mashhadi
Professor, Department of Mechanical Engineering, University of Tehran, Tehran, Iran
Sayed Mehran Mostafavi
Senior Consultant Engineer, Iranian offshore oil company