Experimental study of tool shape and electrolyte type effects on material removal rate and overcut of glass micro-drilling using ECDM process

سال انتشار: 1394
محل انتشار: کنفرانس بین المللی پژوهش در علوم و تکنولوژی
کد COI اختصاصی: CRSTCONF01_141
زبان مقاله: انگلیسی
تعداد مشاهده: 555

نویسندگان

Amirkabir University of Technology, Department of Mechanical Engineering

چکیده

The present research deals with the experimental study of the effects of tool shape and applied voltage on material removal rate of glass micro drilling using the ECDM process. In this study, three different tools including cylindrical rod, micro-drill and micro-mill with various applied voltages are examined and the achieved machining speeds andthe relevant patterns during the process are discussed. The obtained results show that the micro-drill has the highest MRR in differentprocess conditions while the cylindrical rod results in the worst machining speed because of its poor electrolyte circulation effects. Inaddition to the tool shape, increase in the applied voltage results in increase in MRR in the case of different tool shapes.Experimental results show that in comparison with NaOH, using KOH as electrolyte results in a higher material removal rate. Photostaken from the surface and bottom of the holes show that with NAOHas electrolyte overcut is larger and precision is lower, also the bottom surface of the holes has a better finish which is due to the superior etching of KOH.

کلیدواژه ها

Electrochemical discharge machining (ECDM), glass, micro machining, tool electrode, over cut

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.