AN EXPERIMENTAL STUDY OF DRILL CUTTINGS TRANSPORT BY FOAM
محل انتشار: سومین کنفرانس بین المللی نفت، گاز و پتروشیمی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 822
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICOGPP03_080
تاریخ نمایه سازی: 25 بهمن 1394
چکیده مقاله:
Efficient drill cuttings transport to the surface is one the main parameters to reduce drilling time. Foam is potentially one of the efficient drilling fluids for the cuttings transport. In this paper the performance of foam for cuttings transport was investigated through an experimental study. The effect of particle size, foam velocity and viscosity of foaming solution on the cuttings transport capacity was studied. The results showed that the generated foam was able to remove cuttings with an average diameter from 1300 to 3000 μm. A polymer enhanced foam was also successfully generated that significantly increased the capacity of cuttings transport
کلیدواژه ها:
نویسندگان
e niroomand
Sahand Oil and Gas Research Institute, Sahand University of Technology, Tabriz, Iran
m simjoo
Sahand Oil and Gas Research Institute, Sahand University of Technology, Tabriz, Iran
s.a tabatabae njad
Sahand Oil and Gas Research Institute, Sahand University of Technology, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :