Optimization of extruded preform dimensions for a T-shape hydroforming part based on response surface and finite element method

  • سال انتشار: 1387
  • محل انتشار: شانزدهمین کنفرانس سالانه بین المللی مهندسی مکانیک
  • کد COI اختصاصی: ISME16_822
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 2044
دانلود فایل این مقاله

نویسندگان

Ghaffari Tari

M.Sc. Student, Amirkabir University of Technology, Tehran, Iran

Biglari

Associate professor, Amirkabir University of Technology, Tehran, Iran

Mashhadi Kashtiban

MSC.Student Amirkabir university of technology Tehran,Iran

Azimi

Head of Technical Department, Toos Payvand Co., Tehran, Iran

چکیده

Tube hydroforming has been widely applied to produce seamless joints in oil and gas industry. The finite element analysis is used as an effective tool for optimization of hydroforming process. In this paper, a T-shape tube hydroforming process is simulated using the finite element method. The simulation was verified by experiments performed on T-shape tube hydroforming. The internal pressure, material model and other important simulation parameters was obtained from experiments. By using design of experiment methodology number of experiments with different thickness and length setting of initial tube were suggested. In order to avoid costly experiments, the finite element simulation was used. At last response surface methodology (RSM) were adopted to plot the results of the analysis. Since protrusion height, thickness reduction at protrusion region and thickness increase in central region of the product were important design parameters to control, the initial tube thickness and length was so optimized that the best possible product was achieved. Finally, a model using optimized initial tube was analyzed. The predicted amount of parameters was compared to those achieved from the analysis.The comparison showed a good agreement between the predicted and analyzed results.

کلیدواژه ها

Finite Element Method, Response Surface Methodology, Optimization, Tube hydroforming

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.