Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses

  • سال انتشار: 1394
  • محل انتشار: ماهنامه بین المللی مهندسی، دوره: 28، شماره: 9
  • کد COI اختصاصی: JR_IJE-28-9_015
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 557
دانلود فایل این مقاله

نویسندگان

a.h Mahmoudi

Department of Mechanical Engineering, Faculty of Engineering, University of Bu-Ali Sina, Hamedan, Iran

s Heydarian

Department of Mechanical Engineering, Faculty of Engineering, University of Bu-Ali Sina, Hamedan, Iran

k Behnam

Department of Mechanical Engineering, Faculty of Engineering, University of Bu-Ali Sina, Hamedan, Iran

چکیده

To maintain the structural integrity of the engineering components, having an exact knowledge of residual stresses is important. Among all mechanical strain relief techniques to measure residual stresses, slitting is one of the youngest. This technique relies on the introduction of a narrow slot of increasing depth in a part containing residual stresses. Similar to other measurement techniques, slitting also employs simplifying assumptions. One of these assumptions is that the stress does not vary along the cut line. There are many sources of errors in the slitting method. However, the error caused by this assumption can be severe. In this research, residual stresses of quenched samples were measured experimentally using slitting technique. The results were then compared with those obtained from the finite element analyses. The cylindrical specimens were designed with different ratios of height to diameter to investigate the effect of stress variations in transverse direction along the cut plane. It was evident that the non-uniformity of stress can severely influence the residual stresses measurement. The experimental results confirmed the numerical findings

کلیدواژه ها

Residual Stresses , Slitting Method , Stress Variations , Finite Element ,

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.