Investigation of fatigue behavior of polymeric composites manufactured by hand lay-up and vacuum infusion process (VIP)
- سال انتشار: 1393
- محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT04_167
- زبان مقاله: انگلیسی
- تعداد مشاهده: 830
نویسندگان
M. Sc. student, Department of Materials science and Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Associate Professor, Sun Air Research Institute, Ferdowsi University of Mashhad, Mashhad, Iran
Associate Professor, Department of Materials science and Engineering, Shiraz University, Shiraz, Iran
چکیده
In this paper the tension-tension fatigue behavior (R=0.1) of fiber reinforced polymer composites made by hand lay up and vacuum infusion process (VIP) were studied. According to the results of static tension test, tensile strength was higher in the VIP specimens than that of the hand lay up specimens, 387 MPa and 233 MPa respectively. At 76MPa stress amplitude, the VIP specimens survived for 151624 cycles; whereas the fatigue life ofپ hand lay-up specimens was 44422 cycles at 65.57 MPa stress amplitude. Longer life of the VIP specimens can be related to the higher number of defects formed during manufacturing of the hand lay up specimens. Examining the fracture surfaces of the specimens after fatigue tests, revealed that fiber pull out and debonding in hand lay up specimens and matrix cracking and debonding in the VIP specimens were the main mechanisms for their fatigue failures.کلیدواژه ها
fatigue, fiber reinforced polymer composite, hand lay up method, Vacuum infusion process (VIP)مقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.