Investigation on Tensile Properties of Glass/Epoxy/NanosilicaHybrid Nanocomposites
- سال انتشار: 1393
- محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT04_132
- زبان مقاله: انگلیسی
- تعداد مشاهده: 741
نویسندگان
MSc student, Department of Mechanical Engineering, University of Tarbiat Modares, Tehran, Iran
Professor, Department of Mechanical Engineering, University of Tarbiat Modares, Tehran, Iran
Research Assistant, Department of Mechanical Engineering, University of Tarbiat Modares, Tehran, Iran
MSc student, Department of Mechanical Engineering, University of Tarbiat Modares, Tehran, Iran
چکیده
In this research, effect of adding silica nano-particles on the tensile stress-strain response of epoxy matrixcomposites reinforced with glass fibers was studied. A series of nanocomposites with 0.5, 1 and 3 wt.% nanosilica content and contained 40 vol.% glass fibers were fabricated using the hand lay-up method. The epoxy resin system ismade of a diglycidyl ether of bisphenol A (DGEBA), Epon 828, as the epoxy prepolymer and a polyoxypropylene diamine with average molecular weight of 400 gr/mol, Jeffamine D-400, as the curing agent. Static uniaxial tensile tests were conducted to investigate the tensile stress–strain response and tensile properties of unmodified and nanomodifiedcomposites. It was found that the incorporation of a well-disperse nanosilica improved the tensile properties of the composites. The addition of 0.5 wt% nanosilica enhanced the tensile strength, ultimate strain and toughness of about 10, 14 and 24%, respectively, compared to the neat composites.کلیدواژه ها
Tensile strength, Composites, Woven fibers, Hybrid nanocomposites, Nanosilicaمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.