Synthesis of Hybrid Aluminum/ Zirconia NanoparticlesAlumina Microparticles by Semi-Solid Method
- سال انتشار: 1393
- محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT04_060
- زبان مقاله: انگلیسی
- تعداد مشاهده: 568
نویسندگان
Msc Student, Department of Material Engineering, Faculty of Engineering, University of Sistan andBaluchestan, Zahedan, Iran
Assistant Professor, Department of Materials Engineering, Faculty of Engineering, University of Sistan andBaluchestan, Zahedan, Iran
چکیده
Alumina-based hybrid nanocomposite reinforced by zirconia nanoparticles/alumina microparticles with semisolidmethod can be a major concern for making of metal matrix nanocomposites. In this study, the hybrid metal matrix nanocomposites fabricated based on semi-solid and squeezing methods. First the reinforcements were depositedby suspension method on the aluminum sheets and the sheets were heated at 610 to 650 °C in semi-solid state of aluminum. Then the semi-solid mixture was squeezed under hot pressing. The microstructure was studied by opticaland scanning electron microscopy. Also the hardness and compressive strength of the produced composites were studied. The results showed that the suspension parameters and semi-solid process reduced the particles agglomerationin the composites. The hardness and compressive strength of the nanocomposites were improved for lower weight percent of reinforcements. In nanocomposites with more than 3 wt% reinforcements, the mechanical properties decreased due to the particles agglomeration.کلیدواژه ها
Hybrid nanocomposite, Aluminum semi-solid, Zirconia nanoparticles, Agglomeration, Hardness, strengthمقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al / Cu / Ti / Cu / Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.