An Image Processing Technique to Quantify NanofillerLoading Accuracy in Nanocomposites
- سال انتشار: 1393
- محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
- کد COI اختصاصی: COMPOSIT04_058
- زبان مقاله: انگلیسی
- تعداد مشاهده: 811
نویسندگان
PhD student, Department of Chemical and Biological Engineering, Centre for Catalysis Research and Innovation, Universityof Ottawa, Ottawa, Ontario K۱N ۶N۵ Canada
PhD student, School of Computer Science, Carleton University, Ottawa, Ontario K۱S ۵B۶ Canada
Professor, Department of Chemical and Biological Engineering, Centre for Catalysis Research and Innovation, University ofOttawa, Ottawa, Ontario K۱N ۶N۵ Canada
چکیده
The morphology of nanocomposite polymer materials should be homogeneous throughout the entire polymermatrix. In the present research, an image processing technique is proposed in order to quantify the homogeneity of nanosilver loading in poly(sodium acrylate)-based nanocomposites. For this purpose, nanocomposites with differentloadings were synthesized and then, scanning electron microscope (SEM) images were taken. After converting the images to a black and white image (i.e., for noise elimination and thresholding), every image was converted to a matrixof zeroes and ones using a Matlab™ code, i.e., zero if the selected point is black (polymer matrix) and one if the point is white (nanofiller). The total number of ones over the total number of elements gives the loading percent ofnanofiller in the selected SEM image which should reflect the amount of nanofiller added to the polymer based on the predetermined formulation.کلیدواژه ها
morphology, nanocomposite, nanofiller loading, scanning electron microscope (SEM)مقالات مرتبط جدید
- ساخت و بررسی خواص مکانیکی کامپوزیت چند لایه Al/Cu/Ti/Cu/Al با استفاده از فرآیند اتصال نوردی تجمعی (ARB)
- بررسی تاثیر افزودن نیترید آلومینیوم و گرافن بر خواص مکانیکی و مشخصات ریز ساختاری کامپوزیت های بر پایه دی بوراید تیتانیم تولید شده به روش تف جوشی پالسمای جرقه ای-شبیه سازی فرایند برش متعامد با استفاده از ابزار برشی بر پایه ۲TiB
- بررسی خواص مکانیکی کامپوزیت های تقویت شده با الیاف شیشه و جوت
- بررسی تجربی مقاومت به ضربه چندالیهای فلزی-الیافی شیشه وینیل استر تحت تاثیر خوردگی
- بهبود خواص مکانیکی و حرارتی رزین پلی استر غیراشباع تقویت شده با سیلیکا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.