Trace determination and separation of tin (II) by floatationspectrophotometric using kalmagyte and CTAB
- سال انتشار: 1393
- محل انتشار: فصلنامه ارتباطات شیمی ایران، دوره: 2، شماره: 2
- کد COI اختصاصی: JR_ICC-2-2_003
- زبان مقاله: انگلیسی
- تعداد مشاهده: 666
نویسندگان
Department of Chemistry, Payam Noor University, ۱۹۳۹۵-۴۶۹۷, Tehran, Iran. Department of Environmental Health Engineering, Ilam University of Medical Science, Ilam, Iran
Department of Environmental Health Engineering, Ilam University of Medical Science, Ilam, Iran
Department of Epidemiology, Ilam University of Medical Science, Ilam, Iran
Department of Food Hygiene, Faculty of Veterinary Medicine, Shahid Chamran University of Ahvaz, Iran
چکیده
novel floatation-spectrophotometric extraction method was developed for the recovery of tin (II) from aqueous samples prior to determination by UV spectrophotometric detection. The method is based on the formation of a complex between tin (II) and kalmagyte in pH=8. The complex is floated in the interface of n-hexane and aqueous phases. After removing the aqueous phase, the floated particles are dissolved in methanol and the absorbance is measured at 637 nm. Different parameters of the floatation-spectrophotometric technique such as reagent concentration, pH, surfactant, standing time and interfering ions were studied and optimized to obtain the best extraction results with the minimum interference from other compounds. Under these conditions, the extraction of the target compound was almost complete (mean values of recovery was more than 92.6%) in a short time (6 min). The optimized method demonstrated good linearity (r2 > 0.9991) in the range of 4-350 ng/mL, sensitivity (limit of detection for tin (II), 1.7 ng/mL), accuracy (0.19–7.35%) and precision (3.66%, 4.21%). The applicability of the proposed method was demonstrated by extraction of tin(II) from different water samples.کلیدواژه ها
Floatation-spectrophotometric, tin (II), kalmagyte, water samplesمقالات مرتبط جدید
- نقش قراردادهای هوشمند و حقوقی در بهینه سازی فرآیندهای خرید، نصب و نگهداری سیستم های فیلتراسیون در صنایع پتروشیمی
- نقش فیلترهای غشایی در صنایع نفت و گاز: اصول بازرسی و ارزیابی عملکرد سیستم های فیلتراسیون
- شبیه سازی سیالات الکتروفیلتر و داکتینگ
- سنتز و ساخت غشاهای پلی سولفون و پلی اتر سولفون با خواص و آبدوستی کنترل شده برای کاربرد در فناوری های جداسازی غشایی
- تولید عایق نسوز از پسماند تصفیه آب پالایشگاه گاز: تحولی در مدیریت پسماند و توسعه صنعتی پایدار
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.