Appraisement of steel moment frame system with intermediate ductility 3rd and 4th Revision Iranian Code of Practice for Seismic Resistant Design of Buildings ( Standard No.2800 Iran)
- سال انتشار: 1393
- محل انتشار: دومین کنگره بین المللی سازه ، معماری و توسعه شهری
- کد COI اختصاصی: ICSAU02_0596
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1456
نویسندگان
Student MSc, Department of civil engineer, Ayatollah Amoli Branch, Islamic Azad University, Amol, Iran
Professor, Science & Technology, Tehran,Iran
Professor, Institute of science & technology Aryan,Babol,Iran,
چکیده
Seismic correct operation requires that available strength and deformation capacity of structural members must greater than the requirements imposed by earthquakes. According to the behavior of structures during earthquakes, structural performance evaluation should be done by non-linear analysis. Entering the structure to non-linear behavior under earthquake, displacements have been better described than in the forces of structural response and by limiting the displacements instead of forces, level of structure damage can be controlled effectively. Due to the growing advances in earthquake engineering knowledge and the successive need to revise in the regulations codified, the philosophy codified and prepared regulations is important for graduates in this field. Despite its importance, in this article we review some clauses of the Code of Practice for Seismic Resistant Design of Buildings (Standard No.2800 Iran) with fourth edition and provide the basic concepts and philosophy of codification and preparation of these clauses compared with the third edition. In this paper, appraisement steel moment frames 3 floors, 6 floors and 10floors will consider with intermediate ductility and non-linear static structural analysis (pushover) was performed with SAP software.کلیدواژه ها
Pushover, Moment frame, Drift, Base shear, Performanceمقالات مرتبط جدید
- نقش تعامل شهروندان با شهرداری جهت توسعه و آبادانی شهرهای تازه تاسیس
- امکانسنجی پیاده سازی فناوریهای نوین و پایدار برای بهبود مدیریت هوشمند شهری
- طراحی مناطق بهینه باغات خانواده شهر شیراز با استفاده از سیستم اطلاعات مکانی و روش تحلیل سلسله مراتبی
- نگاهی به روش های طراحی معماری از دیدگاه جفری برادبنت
- تاثیر فناوریهای نوظهور ساختوساز بر بافت شهر ی: یکپارچگ ی، چالش ها و فرصت ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.