Lessons learned from Production Logging Interpretation of a well in a Gas Condensate Reservoir

  • سال انتشار: 1390
  • محل انتشار: هفتمین کنگره ملی مهندسی شیمی
  • کد COI اختصاصی: ICHEC07_579
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1256
دانلود فایل این مقاله

نویسندگان

Hamid Reza Nasriani

Iranian Central Oil Fields Co. (ICOFC), National Iranian Oil Co. (NIOC).Reservoir Engineering Department, Zand tower, Zand Blvd., Shiraz, IRAN

Mohammad Ghasem Akbarifard

Iranian Central Oil Fields Co. (ICOFC), National Iranian Oil Co. (NIOC).Reservoir Engineering Department, Zand tower, Zand Blvd., Shiraz, IRAN

Hossein Vahdani

Iranian Central Oil Fields Co. (ICOFC), National Iranian Oil Co. (NIOC).Reservoir Engineering Department, Zand tower, Zand Blvd., Shiraz, IRAN

Mohammad Sinaei

Iranian Central Oil Fields Co. (ICOFC), National Iranian Oil Co. (NIOC).Reservoir Engineering Department, Zand tower, Zand Blvd., Shiraz, IRAN

چکیده

This paper compares Production Logging Tool (PLT) interpretations with LGR Test Measurements and other observations in the field in order to obtain the water production rate and water entry points in a well of a Gas Condensate Reservoir to validate the PLT tool and explain existing production problems and to subsequently optimize reservoir management for a gas field in South of Iran. In this field associated saline water production is an important issue in productionresulting in a substantial productivity impairment of gas wells. In this field 33 wells have been producing 1450 MMScf/day gas to meet field deliverability requirement. Out of these 33 wells, 12 wells deal with saline water production associated with gas which gas production rate is limited tosaline water production. Although the tool was run in two stages to detect the water entry points but the tool did not detectthe water entry points and no water production from intervals was observed. Although the water production rate was 250 STB/Day using test separator but the tool detects nowater production and water entry production intervals showing the poor performance of the tool inthe well. In order to validate the tool performance it is highly recommended to measure gas, condensate and water production rate using test separator

کلیدواژه ها

PLT, LGR measurements, water production, water entry points, Gas Condensate

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.