Influence of pollution loading and flow rate on catalytic BTEX removal with a combined Cu2O, Fe0/Zeolite bed
- سال انتشار: 1392
- محل انتشار: فصلنامه بهداشت، ایمنی و محیط زیست، دوره: 1، شماره: 1
- کد COI اختصاصی: JR_IJHSE-1-1_001
- زبان مقاله: انگلیسی
- تعداد مشاهده: 832
نویسندگان
Department of environmental health engineering, School of Health, Semnan university of medical sciences, Semnan, Iran
Department of environmental health engineering, School of Health, Iran university of medical sciences, Tehran, Iran
Department of environmental health engineering, School of Health, Iran university of medical sciences, Tehran, Iran
Department of environmental health engineering, School of Health, Iran university of medical sciences, Tehran, Iran
چکیده
Environmental impacts and health concerns of BTEX compounds have been pointed in many studies. The agencies responsible for health and environment have delivered standard and guideline for BTEX concentrations. Because of the extensive use in industries and the presence of these compounds in fossil fuels, their emission resources are very divers. Today's, Control of air pollution caused by these compounds is one of the air qualities controlling challenges. Thermal catalyzed process is one of the technologies to control this kind of air pollution and consistent with using nanoparticles as a catalyst, this process is further considered now. So, we conducted this study to survey elimination of the BTEX, form polluted air flow, by this process. In this study, removal of the BTEX from polluted air by a thermal catalyzed process in the presence of zero-valent iron and copper oxide nanoparticles was investigated and the effect of changes in pollution load and flow rate was surveyed on removal efficiency and the decomposition of the pollutants. Fe0 and Cu2O nanoparticles were coated on a bed of natural zeolite (Clinoptilolite) with a zeolite grains size of 1-2 mm. The thermal catalyst process was conducted at 350°C and different pollution loading and air flow rate. 96.18% and 78.42% of removal efficiency achieved with the retention times of 14.1s and 7.05s. Increasing the pollution load reduced removal efficiency and pollutants' mineralization. By doubling the pollution load, the removal efficiency declined as much as 14.5 %. According to the results, increasing of the flow rate has a greater effect than the pollution load on the complete decomposition. Also this process showed a good efficiency for BTEX removal under high pollution loading and flow ratesکلیدواژه ها
Aromatic organics, Air pollution, Chemical process, Nanoparticles, Zeoliteمقالات مرتبط جدید
- راهکارهای نوین مدیریت بحران: از آموزش تا اجرا
- Modeling the Dispersion of SO ₂ Emissions from an Industrial Furnace Stack Using AERMOD
- رفتارهای ایمن و عوامل موثر بر آن
- آسیب های شغلی در پیراپزشکی
- بررسی نقش متغیرهای شغلی (کیفیت زندگی کاری، امنیت شغلی، رضایت شغلی و استرس شغلی) بر کیفیت زندگی آتش نشانان منطقه ۵ تهران
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.