Design and Simulation of New High Step-Up Full Bridge Converter With Extended ZVS Range for High-Voltage Applications
- سال انتشار: 1393
- محل انتشار: بیست و نهمین کنفرانس بین المللی برق
- کد COI اختصاصی: PSC29_316
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1076
نویسندگان
Amir Kabiruniversity of technology Tehran, Iran
Amir Kabiruniversity of technology Tehran, Iran
Amir Kabiruniversity of technology Tehran, Iran
Amir Kabiruniversity of technology Tehran, Iran
چکیده
A new four-switch converter has been presented in this paper which contains a full-bridge and an extra half-bridge structure. Two voltage multiplier cells are applied to the secondary sides of transformers in order to increase voltage gain, so the converter is suitable for boosting applications. Two transformers are used in this structure, so it is able to transfer high power and voltage gain is increased by serial connection of the output voltage multiplier cells. ZVS is achieved for all switches from approximately no load to full load. ZCS of secondary side diodes of the LLC circuit can be achieved by adjusting the resonant frequency. Furthermore, current stress of the output diodes of full bridge part is decreased with respect to linear operation, so the converter is able to be used for high-voltage applications such as electron beam welding (EBW). In high-voltage applications, the transformer suffers from insulation problems and higher turns ratio is restricted because of increase in leakage inductor of the transformer that leads to decrease in voltage gain. Since the output of voltage multiplier cells are connected in series, so for a specific output voltage, turns ratio of the transformers would be smaller than a single transformer in conventional PSFB converter, so voltage of the secondary side of transformers is reduced that leads to lower insulation problems and higher output voltage is achieved easier.کلیدواژه ها
phase shifted full bridge; voltage multiplier cell; electron beam welding; quasi resonant converter; high stepupمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.