Enhanced Oil Recovery by using AMPS in Water-soluble Acrylamide-Based Terpolymers

  • سال انتشار: 1392
  • محل انتشار: سومین کنفرانس بین­ المللی رویکردهای نوین در نگهداشت انرژی
  • کد COI اختصاصی: ETEC03_351
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1289
دانلود فایل این مقاله

نویسندگان

Mohammadali Pourmohammadi-Mahunaki

Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran;

Vahid Haddadi-Asl

Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, Tehran, Iran;

Jamal Aalaie

Polymer Science and Technology Division ,Research Institute of Petroleum Industry, P.O. Box , Tehran ,Iran

Mahmoud Hemmati

Polymer Science and Technology Division ,Research Institute of Petroleum Industry, P.O. Box , Tehran ,Iran

چکیده

Acrylamide (AM) terpolymers comprising two of 2-acrylamido-2-methylpropane sulfonic acid (AMPS), 1-Vinyl-2-pyrrolidinone, and Sodium Vinyl Sulfonate (SVS) comonomers were synthesized by free radical polymerization in inverse emulsion media. Hydrogen nuclear magnetic resonance and Fourier transform infrared were used to investigate formation of terpolymers. Polymer particles with diameters of about 500 nm were formed according to the results of dynamic light scattering and scanning electron microscopy. Higher thermal stability of the synthesized polymers was also confirmed by thermogravimetric analysis results. Rheometrical analysis in deionized and saline water at 30 and 90 °C has been carried out by preparing of aqueous solutions of synthesized polymers. Results showed that AMPS-containing terpolymers are more viscose and thermally resistant compared to the other two comonomers. This is mainly on account of the sulfonic ionic groups which increase the distance between polymer chains because of electrostatic repulsion and finally results in higher viscosity. Increasing salinity acts against this phenomenon, because of the screening effect of cations and anionic sulfonated groups which effectively returns the charge balance and finally results in a lower viscosity. Similarly, higher temperatures weaken the hydrogen bands between polymer chains and water and consequently increase the polymeric chain mobility and the possibility of their coiling. Finally, AM/AMPS/SVS terpolymer was used in porous media experiment and resulted in an enhanced oil recovery. Results showed that this terpolymer is more appropriate in oil recovery compared with water injection method.

کلیدواژه ها

Acrylamide, AMPS, Inverse emulsion, Enhanced oil recovery

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.