Modeling of Brine Discharge from Desalination-Power plant in Bandar Abbas to Reach an Optimum Outfall Design
- سال انتشار: 1393
- محل انتشار: هشتمین کنگره ملی مهندسی عمران
- کد COI اختصاصی: NCCE08_1233
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1383
نویسندگان
M.Sc. Coastal Environmental Engineering, Graduate Faculty of Environment, University of Tehran, Iran
M.Sc. Coastal Environmental Engineering, Graduate Faculty of Environment, University of Tehran, Iran
Assistance of Prof., Graduate Faculty of Environment, University of Tehran, Iran
چکیده
Long-term desalination is considered as a very expensive technology for countries and regions with a dry climate and low rainfall, except for rich countries with great deals of energy resources.Recent progress indesalination technology and severe lack of surface water resources and decrease in ground waterresources has increased use of desalination plants. Along with this, using desalination plant in southern regions of Iran is paid lot of attention due to their adjacency with Persian Gulf. However, using desalinationplant will lead concentrated effluent that is referred to as brine or brine-blow down. The brineis generally more salty than seawater and its temperature is higher than ambient which results in undesirable effects on marine ecosystems. Therefore, the brine should be discharged in away that induce minimum effect on the discharge ambient. In Bandar Abbas power plant development plan, by addingtwo units to the existing plant, the amount of the inletseawater into the desalination plant has increasedfrom 50 m3/s to 75 m3/s for which the heated effluent of them will increase up to 0.15 m3/s. In this research, simulation of brine plume dispersion has been considered, regarding to the heated effluent from Bandar Abbas thermal power plant and an optimum outfall design different scenarios of simulations andoptimum outfall design were compared by applying CORMIX and mixing behavior of surface, submerged single-port and submerged multi-port outfalls were assumed along with temperate. (According to the environment standard)The results showed that effluent discharge in surface channel is not suitable because of low dilution rate, harmful environmental effect and the lack temperaturedrop below 1C 0 at a distance of 300m from the discharge point and needs on efficient multi-port outfall design.کلیدواژه ها
Brine effluent, CORMIX, Desalination, Persian Gulf, Discharge outfallsمقالات مرتبط جدید
- Numerical and analytical prediction of near tunnel wall fire flame length
- Numerical Simulation of the Effect of Damage to the Air Curtain on the SmokeBehavior and Temperature Stratification during Fire in Mine Faces
- کنترل فرآیند طراحی سیستم تهویه تونل های کوتاه ترافیکی در مناطق شهری جهت تامین ایمنی (مطالعه موردی)
- مدل سازی و شبیه سازی الکتروموتورها و درایوهای نوار (TBM , Stacker , Marti )با استفاده از نرم افزار : PID/Simulink/Matlabپروژه تونل انتقال آب کنجانچم KT۲
- مهندسی ارزش در پروژه های میکروتونلینگ تهران
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.