MATERIAL REMOVAL SIMULATION OF AUTOFRETTAGED COMPOUND TUBES
محل انتشار: پانزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,067
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME15_149
تاریخ نمایه سازی: 8 فروردین 1386
چکیده مقاله:
Real loading- unloading behavior of an A723-1130 MPa high-strength steel alloy incorporated in the variable material properties (VMP) numerical algorithm to predict residual stresses resulted from autofrettage and shrink fit in two autofrettage compound tubes design philosophies. Using an analytical method, the numerical solutions were developed to estimate residual stresses induced by bore material removal via machining. Using developed VMP code and isotropic hardening rule in both autofrettaged compound tube design philosophies, residual stresses resulted from shrink fit and autofrettage processes and via post machining, were calculated. Machining process simulation was performed for 10 mm bore material removal. ANSYS commercial FEM software was used for validating the results of VMP code. The results of VMP method and ANSYS were in good agreement with each other. Finally with the help of recorded real unloading behavior of A723-1130 MPa high-strength steel alloy, also aforementioned simulations were performed on various tubes. The material removal simulation was modeled for 20 mm material removal
from the bore.
کلیدواژه ها:
نویسندگان
Hoseini
MSc Studen Sharif University of Technology School of Mechanical Engineering
Farrahi
Professor Sharif University of Technology School of Mechanical Engineering
Mohammadi
MSc Student Sharif University of Technology School of Mechanical Engineering
Assempour
Associated Professor Sharif University of Technology School of Mechanical Engineering