Thermoelectric Heat Transfer Modeling of Shape Memory Alloy Actuators
- سال انتشار: 1393
- محل انتشار: بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک
- کد COI اختصاصی: ISME22_591
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1275
نویسندگان
Shahrekord, University of Shahrekord
Shahrekord, University of Shahrekord
Tehran, University of Tehran
Shahrekord, University of Shahrekord
چکیده
Shape Memory Alloy (SMA) wires used as an actuator, are usually actuated by resistive heating of electrical currents rather than by the surrounding medium. Owing to difficulties in control of electrically-heated SMAs, the thermoelectric heat transfer of SMA wires is undertaken in this paper. First-order convective heating model is used for thin SMA wire which accounts for the latent heat and thermal hysteresis of transformation. The convective heat transfer coefficient, h, is assumed to be a polynomial function of temperature. In addition, heat capacity is defined as a function of both temperature and stress. A one-dimensional constitutive model of Brinson is applied to determine stress in the wire. The electrical heat transfer equation is coupled with the constitutive equation to simulate the constant strain behavior of the SMA wire. Based on this simulation, a simplified model is proposed to predict the temperature response of SMA wire in order to calculate the time response of SMA actuated systems. A series of experiment are performed in which the transient temperature data are recorded for different applied electric current profiles to validate these two models. For different current input profiles, the calculated time response is in good agreement with the experimental data. The developed models may be applied in order to predict the temperature of a current carrying SMA wire without using direct temperature measurement methods.کلیدواژه ها
Convection, Heat transfer, Shape Memory Alloyمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.