Computational analysis of mixed convection water–Al2O3 nanofluid in a square cavity: Effect of variable properties and moving wall location
- سال انتشار: 1393
- محل انتشار: بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک
- کد COI اختصاصی: ISME22_515
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1243
نویسندگان
M.Sc. Mechanical Engineering, University of Guilan, Rasht, I.R Iran
M.Sc. Mechanical Engineering, University of Kashan, Kashan, I.R Iran;
M.Sc. Mechanical Engineering, University of Kashan, Kashan, I.R Iran
چکیده
Mixed convection of a nanouid consisting of water and Al2O3 in a square cavity with using variable thermal conductivity and variable viscosity has been studied numerically. The left and right walls are maintained at different constant temperatures whileupper and bottom insulated walls. Two different cases were considered based on moving wall position in the square cavity. In Case I the left vertical side (hot) moving upwards and In Case II the right vertical side (cold) moving downwards. The study has been carried out for the Richardson numbers of 0.01–100, the solid volume fraction of 0– 0.09 and the Grashof number of 104. The governing equations are solved numerically using the nitevolume approach. Results are presented in the form of streamlines, isotherms and average Nusselt number. It was found from the obtained results that, in general, the average Nusselt number of the hot wall increases with decreasing in Richardson number. Moreover the obtained results showed that the location of moving wall had most influence on increasing of average Nusselt number. Finally the results obtained using variable thermal conductivity and variable viscosity of Khnafer formulas were compared to the results obtained by the Maxwell-Garnett (MG) model and the Brinkman model. Signicant differences are found between the magnitudes of heat transfer enhancement in the enclosure for two employed models.کلیدواژه ها
Mixed convection, Variable properties, Square cavity, Al2O3–Water Nanofluid, , Finite volume methodمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.