Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,104

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME22_026

تاریخ نمایه سازی: 14 مرداد 1393

چکیده مقاله:

Numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges to the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with width of W=30mm and is kept at constant temperature T= 62°C. Inner cylinder which is a part of the slot jet structure is chosen to be insulated. The effects of jet Reynolds number in the range of 100≤ Rej ≤1000 and the ratio of spacing between nozzle and outer cylinder surface to the jet width for H=4.2 and H=12.5 on the local and average Nusselt numbers are examined. In the numerical study FLUENT CFD package was used and validated by comparing the results with the experimental data at the same Reynolds number. It is observed that the maximum Nusselt number occurs at the stagnation point at (θ=0°) and the local heat transfer coefficient decrease on the circumference of the cylinder with increase of θ as a result of thermal boundary layer thickness growth. Also results show that the local and average heat transfer coefficients are raised by increasing the jet Reynolds number and by decreasing the nozzle-to-surface spacing.

نویسندگان

A. Azimi

Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran

M. Ashjaee

Department of Mechanical Engineering, University of Tehran, Tehran

M. Khayat

Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran