NUMERICAL ANALYSIS OF VISCO-PLASTIC BEHAVIOUR OF CIRCUAR SHEET METAL UNDER SHOCK PRESSURE
محل انتشار: سیزدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,215
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME13_612
تاریخ نمایه سازی: 21 اسفند 1385
چکیده مقاله:
The plastic deformation process of fully clamped circular plates under shock loads is analyzed numerically. A lagrangian mesh of zones is defined in which the difference form of equations of motion relate the stresses of the zones to the accelerations and velocities of the nodes. These velocities in turn are related to the stresses by a suitable constitutive equation. The code is developed and used to analyze deformation characteristics of rate sensitive steel sheet with various loading conditions. The central deflection, response time and the profile of deformed part are obtained. The comparison of the results with those of experiments reported by other researcher, shows good agreements.
کلیدواژه ها:
High speed forming – Sheet metal forming - Numerical analysis – FDM– Tensor code
نویسندگان
Moslemi Naeini
Associate Professor Department of Mechanical Engineering, Faculty of Engineering, Tarbiat Modarres University
Liaghat
Professor Department of Mechanical Engineering, Faculty of Engineering, Tarbiat Modarres University
Ghadery
Professor Department of Mechanical Engineering, Faculty of Engineering, Tarbiat Modarres University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :