Finite element modeling of sliding a rigid body on acantilever beam
محل انتشار: سومین کنفرانس بین المللی آکوستیک و ارتعاشات
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 828
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISAV03_080
تاریخ نمایه سازی: 29 تیر 1393
چکیده مقاله:
Active propagation of diagnostic waves is one of the common techniques for damage detection.Because of advantages of PZT, NDE companies currently use them as actuating or sensingequipment. But the sliding of two bodies is too difficult to detect. Because of the availabilityof a cantilever beam to the authors, it is chosen as an experiment setup. Location andnatural frequency of the sensors is an important issue in investigating the sliding phenomenon.In this case the location of the sensor is fixed at the end of the beam and the natural frequencyof the sensor has been studied and different sliding velocities and different frictioncoefficients are used in order to study their effect, consequently FFT is performed on the voltage to see the effects in the frequency domain
کلیدواژه ها:
نویسندگان
Samane Hosseingholizadeh
Advanced Dynamic and Control System Laboratory, School of Mechanical Engineering
Aghil YousefiKoma
Advanced Dynamic and Control System Laboratory, School of Mechanical Engineering
Fateme Aghighi
Advanced Dynamic and Control System Laboratory, School of Mechanical Engineering
Morad Karimpour
Advanced Dynamic and Control System Laboratory, School of Mechanical Engineering
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :