Effect of TiO2 Nanoparticles on Mechanical behavior of TiO2-Glass/EpoxyHybrid Nanocomposite
- سال انتشار: 1392
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH02_169
- زبان مقاله: انگلیسی
- تعداد مشاهده: 979
نویسندگان
PhD Student
Associate Professor, Department of Mechanical Engineering, Amirkabir Uinversity of technology, Tehran, Iran
چکیده
In this research, by addition of 0.25, 0.5 and 1 Vol. % of TiO2 to E-glass/Epoxy resin, mechanical properties of hybrid nanocomposites have been tested.The hybrid nanocomposite is fabricated by 4 layers of 200 gr/m2 E-glass and epoxy resin that mixed mechanically and ultrasonically with TiO2 nanopowder. The results of tensile tests of samples show good improvement in the stiffness and strength of hybrid nanocomposites. Although the stiffness and strength of pure epoxy are increased a little, but because of some adhering changes between fiber and nanocomposite matrix, mechanical properties of final hybrid nanocomposite are significantly changed.Tensile test performed in two cases of 0/90 and -45/+45 laminating. In both cases, test results show very good improvement around 20-30% of initial strength although improvement in stiffness is limited. The results of DMTA tests showed great improvement in viscoelastic behavior of samples. For more analysis, creep test of hybrid nanocomposite is also done and the results showed improvement in creep resistance like the TiO2/Epoxy nanocomposite. Fractography of ruptured samples indicated better contact between fiber and matrix in hybrid nanocomposites.However, all tests showed that adding of TiO2 in the epoxy resin and Glass/Epoxy composite, showed improvement in many properties of final products. This technique is also can be used for eliminate the disadvantages and also improve some properties of Glass/Epoxy composite.کلیدواژه ها
Viscoelastic Behavior, TiO2-Glass/Epoxy Hybrid Nanocomposite, tensile test, creep test, DMTAمقالات مرتبط جدید
- Analytical determination of flexural rigidity of thin-walled pultruded composite I-beams
- Matrix-Dominated Damage Process in CFRP Composite Laminates underFlexural Loading Condition
- Indentation Size Scale Effect on Mechanical Properties of Cold SprayCoating
- Determination of Forming Limit Diagrams for Tailor Welded Blanks
- Control of dynamic building façade: design, analysis and experiments
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.