Experimental characterization of Latania natural fiber reinforced PP/EPDMcomposites in Charpy impact

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,331

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_155

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

Recently, global warming has come out be a growing concern in the world. One of the main reasons behind global warming is using synthesis materials. The idea of natural and bio-composites substitution for synthesis composite materials has therefore attracted many researchers' attention. In the present research, for the fist time, the latania natural fiber was employed to reinforce a composite material blend of polypropylene (PP) and ethylene-propylene-diene (EPDM). Infusion moulded method was utilized to fabricate standard specimens. Different weight percentages of latania natural fiber were considered and the energy absorptions were compared. It was found that adding natural fiber could enhance the energy absorption capability by PP composites. The fabrication procedure and testing conditions for the composite specimens were intentionally the same as those mentioned in a recent original research article on jute fiber reinforced PP/EPDM composites published by journal of reinforced plastics and composites. The results obtained by the latania natural fiber reinforced PP/EPDM were then compared with those for jute fiber reinforced PP/EPDM available in the existing literature and the optimized fiber was introduced.

نویسندگان

Vahid Daghigh

Young Researchers and Elite Club, Islamic Azad University, Science and Research Branch, Tehran, Iran

M. R Arbabi

Department of Mechanical Engineering, Islamic Azad University, Jasb Branch, Delijan, Iran

Hamid Daghigh

Rock Mechanics Division, Faculty of Engineering, Shaheed Bahonar University of Kerman, Kerman, Iran

Kamran Nikbin

Department of Mechanical Engineering, Imperial College, London, UK

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Sabbagh A.L. (2014), Composite Part B: Engineering 57, 126-135. ...
  • Khalili S.M.R., Eslami Farsani R., Rafiezadeh S (2011) Reinforced Plastics ...
  • Daghigh V., Khalii S.M.R., Eslami Farsan R., (2011) Polymer Processing ...
  • Eslami Farsani R. Khalili S.M.. Daghigh V. (2013), International Journal ...
  • Khalili S.M. R., Daghigh, V., Eslami Farsani R. (2011), Reinforced ...
  • Wells JK and Beaumont PWR. (1985) Journal of Materials Science ...
  • Jarukumjorn K, Sutapun W, Ruks akulpiwar, et al (2008) Macromol ...
  • نمایش کامل مراجع