Effect of Mesoporous Silica and Hydroxyapatite Nanoparticles on the TensileBehavior of Polypropylene: Experimental Studies and Simulations
- سال انتشار: 1392
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH02_066
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1077
نویسندگان
MS Student
PhD Student
Professor, Department of Mechanical Engineering, Semnan University, Semnan, ۳۵۱۹۵۳۶۳, Iran,
چکیده
This study focuses on the effect of incorporation of two different types of nanomaterials, mesoporous silica (MCM-41), Hydroxyapatite (HA) into the polymer matrix on morphology and tensile properties of polypropylene (PP). PP/MCM-41 and PP/HA nanocomposites have been prepared by melt mixing in a twin-screw extruder. The results of tests showed that tensile strength is increased by 6.47% and 26.57% by using MCM-41and HA nanoparticles rather than neat PP, respectively. The MCM-41 filler leads to lower tensile properties comparing to the HA nanoparticles, but the advantage of MCM-41 filler than HA particles is the porous structure and high surface area of MCM-41 particles makesavoids agglomerations even at high weight percentage levels. Moreover, to investigate the tensile behavior of nanocomposites using constitutive models, applicability and best fit of three different hyperelastic models including Van der Waals, Ogden and Marlow against experimental data were studied using the commercial software ABAQUS/CAE. The performed simulations produced good results for uniaxial tensile loading. SEM observations showed that the nanomaterials were well dispersed in the polymer matrix and the enhancement of the interface between the matrix and fillers were obtained by nanoparticles.کلیدواژه ها
Hybrid nanocomposites, Tensile properties, Simulation, Mesoporous Silica, Hydroxyapatiteمقالات مرتبط جدید
- Analytical determination of flexural rigidity of thin-walled pultruded composite I-beams
- Matrix-Dominated Damage Process in CFRP Composite Laminates underFlexural Loading Condition
- Indentation Size Scale Effect on Mechanical Properties of Cold SprayCoating
- Determination of Forming Limit Diagrams for Tailor Welded Blanks
- Control of dynamic building façade: design, analysis and experiments
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.