Designing the Die of Thermoplastic Pultrusion for Tubular ProductProduction
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 847
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_050
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
Nowadays, high proportion of manufactured composite parts allocates to thermoplasticbased composites. One of the growing continuous production processes in the composites, is thermoplastic pultrusion. The use of continuous fiber for its flexural tensile strength and impact bearing and the use of thermoplastic polymer for its correction ability, high toughness, recyclability, reparability and high efficiency are increasing in the industry. In order to obtain an acceptable and safe product, designing an appropriate die for productive products, play a significant role. In this study, for tubular product production, designing the die of the thermoplastic pultrusion and effective parameters on the designing process are investigated. In the tubular product production, the glass roving (2400 Tex.) and High Density Polyethylene (HDPE) are used respectively as reinforcement and matrix.
کلیدواژه ها:
نویسندگان
M Tutunchi
Master Student
M Golzar
Associate Professor
H Ghorbani
PhD Student, Department of Mechanical Engineering, University of Tarbiat Modares, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :