Analysis of Chatter in Tandem Rolling Mills based on Coulomb Model
- سال انتشار: 1392
- محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
- کد COI اختصاصی: WMECH02_034
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1032
نویسندگان
PhD Student
Associate Professor
Assistant Professor, Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶-۸۳۱۱۱, Iran,
چکیده
Cold rolling is the most vital process in manufacturing flat sheet products. During the cold rolling of thin metal sheets, undesired mechanical vibrations, generally referred to as chatter, are often generated. It usually lowers the surface finish of the sheet and in some cases causes gauge variation. It may also cause severe damage to the rolling mill and strip rupture under extreme conditions. In this research, a chatter model in tandem rolling mills is proposed based on the friction coefficient model or the Coulomb model. To study chatter in rolling, it is necessary to set up models for the rolling process as well as the mill stand. The model relaxes certain assumptions, by considering the influence of the material strain-hardening effect and the elastic deformation of the work roll. The results of the simulation are verified by comparing to experimental data obtained from a full scale industrial mill. The main chattering characteristic, i.e., the critical rolling speed, obtained from the simulation program has been found to be in good agreement with that of the experimental measurements.کلیدواژه ها
Cold rolling, Chatter, Vibration, Coulomb model, Experimentمقالات مرتبط جدید
- Analytical determination of flexural rigidity of thin-walled pultruded composite I-beams
- Matrix-Dominated Damage Process in CFRP Composite Laminates underFlexural Loading Condition
- Indentation Size Scale Effect on Mechanical Properties of Cold SprayCoating
- Determination of Forming Limit Diagrams for Tailor Welded Blanks
- Control of dynamic building façade: design, analysis and experiments
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.