Simulation Study of WAG and SWAG Injection Scenarios in One of Iranian Oil Fields: Case Study
محل انتشار: سومین کنگره ملی مهندسی نفت
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 848
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IPEC03_123
تاریخ نمایه سازی: 7 تیر 1393
چکیده مقاله:
In the common methods of water and gas injection, high and unsuitable mobility ratio within the injected fluid and the oil in the reservoir, leads toviscose fingering and reduction of sweep efficiency. To improve sweepefficiency alternating slugs of water and gas (WAG injection) designed. Injection of water slugs followed by gas, leads to triple region, increase the contact level of injected fluid and reservoir, stable the movement front,and finally increase the recovery.In this work, scenarios of WAG and Simultaneous WAG (SWAG) are compared to specify the appropriate injection method. Then ultimate oilrecovery, residual oil saturation, daily and total oil production are compared in these scenarios. Also these scenarios in two five spotinjection patterns were compared. Results indicated that, SWAG injection has the higher oil production and lowest residual oil saturation. So adding the number of wells without increasing in oil rate could raise the recovery.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :