Simulation of Store Separation using Low-cost CFD with Dynamic Meshing
- سال انتشار: 1393
- محل انتشار: ماهنامه بین المللی مهندسی، دوره: 27، شماره: 5
- کد COI اختصاصی: JR_IJE-27-5_006
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1002
نویسندگان
Department of New Technologies Engineering, Shahid Beheshti University, Tehran, Iran
Department of New Technologies Engineering, Shahid Beheshti University, Tehran, Iran
Department of Aerospace Engineering, Amirkabir University, Tehran, Iran
Department of Aerospace Engineering, Amirkabir University, Tehran, Iran
چکیده
The simulation of the store separation using the automatic coupling of dynamic equations with flow aerodynamics is addressed. The precision and cost (calculation time) were considered as comparators.The method used in the present research decreased the calculation cost while limiting the solution errorwithin a specific and tolerable interval. The methods applied to model the aerodynamic forces are timedependent dynamic meshes and quasi-static methods. In the time-dependent method, a dynamic unstructured tetrahedral mesh approach using combination of spring-based smoothing and localremeshing is employed in respect of bodies motion with an implicit, second-order upwind accurate 3-D Euler solver. In this method, a 6dof dynamic code is coupled with the flow solver to update the store trajectory information. In the quasi-static method, a 3-D implicit, steady state Euler solver isautomatically integrated with a grid generation software and a 6dof dynamic code. Although the timedependentmethod is more precise and reliable, it is not proper and appropriate for the initial design of the separation system due to its high cost. The quasi-static solution is very fast, but unable to simulate realistically because of not satisfying the problem conditions due to solution divergence as the storespeed increases. The method used in the present research decreased the calculation cost while limiting the solution error within a specific and tolerable interval. In this way, the time step can be enlarged, the solution can be carried out with a few calculation points, and the solution can have considerably morespeed with a limited error magnitude. Simulation of the store separation using the automatic coupling of dynamic equations with flow aerodynamics with the new Low-Cost method is the innovative aspect of this paper. To validate the solution method, the transonic store separation was simulated that agreed well with the wind tunnel test outcomes.کلیدواژه ها
Store Separation,Automatic Coupling,Dynamic Mesh,Quasi Static,Time Dependent Solution,Low-cost CFDمقالات مرتبط جدید
- بررسی به کارگیری سیستم ذخیره سازی انرژی با استفاده از منابع انرژی تجدیدپذیر
- اقدامات لازم برای حفاظت از محیط زیست دریایی
- ارائه طرح مبتنی بر رایانش ابری جهت ارتقاء بهره وری صنایع خودروسازی (مطالعه موردی: مدیران خودرو)
- مروری بر تکنولوژی ماکرویو برای خردایش سنگ های کمیاب
- کاربرد و بکارگیری تکنولوژی های اینترنت اشیا ، یادگیری ماشین و پردازش تصویر در امنیت و کنترل خودرو
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.