Effect of Mechanical Milling on the Morphology and Structural Evaluation of Al-Al2O3 Nanocomposite Powders
- سال انتشار: 1393
- محل انتشار: ماهنامه بین المللی مهندسی، دوره: 27، شماره: 4
- کد COI اختصاصی: JR_IJE-27-4_006
- زبان مقاله: انگلیسی
- تعداد مشاهده: 983
نویسندگان
Department of Mechanical Design and Production Engineering,Faculty of Engineering, Zagazig University, Egypt
Department of Mechanical Design and Production Engineering,Faculty of Engineering, Zagazig University, Egypt
Department of Mechanical Design and Production Engineering,Faculty of Engineering, Zagazig University, Egypt
Nuclear Research Center, Atomic Energy Authority Cairo, Egypt
چکیده
The morphological and microstructural changes during mechanical milling of Al powder mixed with 2.5, 5 and 10 wt.% Al2O3 particles were studied. The milling was performed in a planetary ball mill forvarious times up to 20h. The produced composite powders were investigated using X-ray diffractionpattern (XRD) to elucidate the role of particle size, secondary phase content and milling time on grain size and lattice strain of Al matrix. The aluminum crystallite size estimated with broadening of XRD peaks by Williamson–Hall formula. The morphological changes were studied by SEM technique. Theresults show that the addition of hard Al2O3 particles accelerates the milling process, leading to faster work hardening rate and fracture of the aluminum matrix. Furthermore, Al becomes smaller crystallite size during ball milling of Al powder in the presence of Al2O3 particles. The results revealed that thegrain size of milled powders was about 45nm with a noticeable presence of agglomerates. Uniform distribution of nano-sized Al2O3 particles in the Al matrix could be achieved with increasing milling time.کلیدواژه ها
Mechanical Milling,Al-Al2O3 Nanocomposite Powder,Morphology,Particle sizeمقالات مرتبط جدید
- بررسی به کارگیری سیستم ذخیره سازی انرژی با استفاده از منابع انرژی تجدیدپذیر
- اقدامات لازم برای حفاظت از محیط زیست دریایی
- ارائه طرح مبتنی بر رایانش ابری جهت ارتقاء بهره وری صنایع خودروسازی (مطالعه موردی: مدیران خودرو)
- مروری بر تکنولوژی ماکرویو برای خردایش سنگ های کمیاب
- کاربرد و بکارگیری تکنولوژی های اینترنت اشیا ، یادگیری ماشین و پردازش تصویر در امنیت و کنترل خودرو
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.