Boundary Shear Stress in a Trapezoidal Channel

  • سال انتشار: 1391
  • محل انتشار: ماهنامه بین المللی مهندسی، دوره: 25، شماره: 4
  • کد COI اختصاصی: JR_IJE-25-4_004
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 942
دانلود فایل این مقاله

نویسندگان

s javid

Department of Civil Engineering, Mahabad Branch, Islamic Azad University, Mahabad, Iran. P O Box: ۵۷۱۶۷-۷۳۵۶۳

m mohammadi

Associate Professor in Civil Engineering. (Hydraulics & River Mechanics), Department of Civil Engineering., Faculty of Engineering., P O Box ۱۶۵,Urmia ۵۷۵۶۱-۱۵۳۱۱, Iran

چکیده

This paper focuses on a hydraulic radius separation approach used to calculate the boundary shear stress in terms of bed and wall shear stress proposed in a trapezoidal channel. The average bed and sidewall shearstress in smooth trapezoidal open channels are derived after using Guo and Julien’s early equations, takinga part of an investigation to cover both rectangular and trapezoidal channels. On the basis of the conformal mapping procedure, a numerical solution is obtained for a case of constant eddy viscosity without concerning secondary currents effect. In comparison with laboratory measurements data, the firstapproximation for a rectangular channel overestimates the average bed shear stress measurement by about4.8% and by decreasing a sidewall slope, overestimation increases. It, however; underestimates the average sidewall shear stress by about 6.88%; in this case, underestimation increases while sidewall slope is decreasing. A second approximation is then presented by introducing two lumped empirical correctionfactors for taking into account the effects of secondary currents, variable eddy viscosity and else. Usingexperimental data, in terms of average bed shear stress, the second approximation agrees very well (at least R2> 0.99, and an average relative error less than 5.35%) over a wide range of width to depth ratios. In terms of average wall shear stress, the second approximation returns acceptable results despite the scatter data with an average relative error less than 5.95% and by R2> 0.93 where it seems to be reasonable

کلیدواژه ها

Boundary Shear Stress,Trapezoidal Channel,Hydraulic Radius,Conformal Mapping,Eddy Viscosity,Secondary Currents

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.