Investigation of viscosity effect on velocity profile and cavitation formationin diesel injector nozzle
- سال انتشار: 1392
- محل انتشار: هشتمین همایش بین المللی موتورهای درونسوز
- کد COI اختصاصی: ICICE08_055
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1202
نویسندگان
Faculty of Mechanical Engineering Department, Shahid Rajaee Training Teacher University
Assistant Professor, Mechanical Engineering Department, Shahid Rajaee Training Teacher University
چکیده
The effect of cavitation inside real diesel injector nozzle is challenging both theoretically and experimentally,since it is characterized by large pressure gradient and small orifice geometry. A mixture based model in Ansysfluent v14 were performed for the simulation. Simulation is validated using available two‐phase nozzle flow data.Simulation was performed with finite volume method and simple algorithm. From three cavitation model that isavailable in Ansys fluent v14( 1‐ Schnerr and Sauerr cavitation model, 2‐ Zwart gerber belamri cavitation model3‐ Singhal cavitation model), Our simulation were perform with Singhal cavitation model because the other twomodels were not capable in predicting choke condition at all. Validation for several parameters such as massflow rate and velocity profile was performed. At the end our main focus was toward the effect of viscosity oncavitation formation and velocity profile in nozzle’s throttle. Several simulations have been conducted withdifferent software such openfoam but none of them could precisely predict mass flow rate in choke condition.Our simulation was capable of predicting mass flow rate choke condition with 1.9% error from experimentaldata.کلیدواژه ها
cavitation, injection nozzle, chokes flow, modeling, and two‐phase flowمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.