Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method
عنوان مقاله: Investigation of the Solution Electrical Conductivity Effect upon the Synthesis of Carbon Nanotubes by Arc Discharge Method
شناسه ملی مقاله: JR_IJEE-4-1_007
منتشر شده در شماره 1 دوره 4 فصل شماره ویژه در سال 1391
شناسه ملی مقاله: JR_IJEE-4-1_007
منتشر شده در شماره 1 دوره 4 فصل شماره ویژه در سال 1391
مشخصات نویسندگان مقاله:
Asieh Dehghani Kiadehi - Nanotechnology Research Institute, School of Chemical Engineering,Babol University of Technology, Babol, Iran
Mohsen Jahanshahi - Nanotechnology Research Institute, School of Chemical Engineering,Babol University of Technology, Babol, Iran
Mohammadreza Mozdianfard - Faculty of Chemical Engineering, University of Kashan, Kashan, Iran
Gholamreza Vakili-Nezhaad - Faculty of Chemical Engineering, University of Kashan, Kashan, Iran
خلاصه مقاله:
Asieh Dehghani Kiadehi - Nanotechnology Research Institute, School of Chemical Engineering,Babol University of Technology, Babol, Iran
Mohsen Jahanshahi - Nanotechnology Research Institute, School of Chemical Engineering,Babol University of Technology, Babol, Iran
Mohammadreza Mozdianfard - Faculty of Chemical Engineering, University of Kashan, Kashan, Iran
Gholamreza Vakili-Nezhaad - Faculty of Chemical Engineering, University of Kashan, Kashan, Iran
Some techniques have been developed to produce carbon nanotubes (CNTs) in sizeable quantities,including arc discharge, laser ablation and chemical vapor deposition (CVD). Arc discharge in liquidenvironment is a new, simple and cheap method of synthesizing CNTs. CNTs in this study were fabricated byarc discharge in liquid. The present work was undertaken to study the effect of electrical conductivity of liquid on CNTs production and was fabricated using arc discharge between two graphite electrodes submerged in different aqueous solutions of NaCl, KCl and LiCl. For comparative study, CNTs were synthesizedunder different electrical conductivity conditions and the results were analyzed, compared and discussed.The scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy were employed to study the morphology of these carbon nanostructures. Based on LiCl 0.25 N, high-crystalline and a longed multi MWCNTs, SWCNTs were synthesized by using this technique
کلمات کلیدی: Electrical Conductivity .Carbon nanotubes. Arc discharge in liquid .Purification .Synthesized carbon nanotube
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/251950/