Application of Response Surface Methodology for Optimization of Picker-Husker Harvesting Losses in Corn Seed

  • سال انتشار: 1390
  • محل انتشار: فصلنامه انرژی و محیط زیست ایران (ایرانیکا)، دوره: 3، شماره: 2
  • کد COI اختصاصی: JR_IJEE-3-2_006
  • زبان مقاله: انگلیسی
  • تعداد مشاهده: 1334
دانلود فایل این مقاله

نویسندگان

S.H pishgar komleh

Department of Agricultural Machinery Engineering,Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran

a keyhani

Department of Agricultural Machinery Engineering,Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran

m.r mostofi sarkari

Iranian Agricultural Engineering Research Institute, Karaj, Iran

a jafari

Department of Agricultural Machinery Engineering,Faculty of Agricultural Engineering and Technology, University of Tehran, Karaj, Iran

چکیده

Seed corn is one of the most important crops due to its high economical value. For this reason harvesting operation should be done precisely. Losses in harvesting seed corn are inevitable but can bedecreased to the acceptable level. There are several machinery factors such as cylinder and travel speed whichcan affect total harvesting losses in two stage harvesting method (with picker-husker and sheller). For this purpose this study evaluated the amount of losses in different speed levels (3, 4 and 5 km h ) and cylinderspeed (400, 500 and 600 rpm) and investigated the relationship between the specified factors (independent variables) and machinery losses (dependent variable). All types of machinery losses were measured and summed as total losses from a representative seed corn field. In order to find the relationship between the variables several models (linear, 2FI, quadratic and cubic) were tested. All analyses were done by applying theresponse surface methodology based on two variables, three levels and central composite design (CCD). Basedon the results of this study, the relationship between cylinder and travel speed was analyzed and thecorresponding model was designed. The results recommended that the 2FI model as the highest order model with significant term can describe the harvesting losses in relationship between cylinder and travel speed. The coefficient of determination (R 2), the adjusted determination coefficient (adjusted R2 ) and coefficient ofvariation (CV) were calculated as 0.90, 0.89 and 3.69%, respectively and the response surface results showedthat an increase of travel and cylinder speed would lead to an increase of harvesting losses. It was denoted that the travel speed have more impact on harvesting losses in comparison with cylinder speed. The optimization study showed the least harvesting losses of 209.88 kg ha in cylinder and travel speed of 600 rpm and 3 km _ h , respectively. It was concluded that the increase of travel and cylinder speed resulted in the increase of _ harvesting losses where the highest losses score was occurred in 5 km h and 600 rpm, respectively.

کلیدواژه ها

Response Surface Methodology; Seed Corn; Picker-husker; Machinery Losses

مقالات مرتبط جدید

اطلاعات بیشتر در مورد COI

COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.

کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.