Analytical and Numerical and Experimental Investigation of an Ogive and Semi- Spherical Nose- Shaped Projectile Perforating Into a FRP Laminates Target
- سال انتشار: 1392
- محل انتشار: کنفرانس ملی مهندسی مکانیک ایران
- کد COI اختصاصی: NCMII01_318
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1167
نویسندگان
Malek ashtar university of technology, Tehran, Iran
Imam Hossein university, Tehran, Iran
چکیده
Fiber-Reinforced Plastic (FRP) laminates have received extensive attention due to their high specific strength and high specific stiffness. They are used vastly in various civilian and non-civilian industries. Numerous studies have been conducted to identify and analyze deformation mechanisms occurring during dynamic penetration and perforation of FRP laminates. In this article, a new model is developed which considers friction between projectile nose and target material. The model developed here, is based on Wen’s model of FRP laminate target struck by a projectile. A number of experiments were designed, performed and analyzed for ogive nose projectile and carbon/epoxy laminates. An equation for empirical constant β is derived using the results of experimental investigation. The results of the new model and Wen's model were compared with experimental results. The results of comparison showed that the new model is in good agreement with experimental investigation. In fact, the results of the new model are more accurate than Wen's model. Also, perforations of the same projectile into FRP laminates were simulated using LS-DYNA capability. Impact velocity range was about 100 m/s and normal impact were considered. Simulation results were compared with analytical and experimental results and the results of the comparison showed a very good agreement between themکلیدواژه ها
Perforation- Ogive nose - Analytical method- Simulation method- Experimental testمقالات مرتبط جدید
- توسعه مبدل حرارتی داخلی ( IHX ) از طریق تغییر فرآیند ساخت و تولید لوله های گاز کولر در صنعت خودروسازی
- بهبودعملکرد سیکل تبرید تراکمی با تغییر فرآیند ساخت مبدل SLHX از آرایش مماسی به هم مرکز
- بررسی تاثیر لایه میانی روی در اتصال غیر مشابه آلیاژ پایه منیزیم AZ۳۱ و آلومینیوم ۶۰۶۱ به روش جوشکاری اصطکاکی اغتشاشی نقطهای
- بررسی تجربی سوراخکاری کامپوزیتهای پلیمری: مقایسه جوت و شیشه
- سیستم هوشمند پایش وضعیت بلبرینگ با استفاده از طیفنگاره صوتی جهت طبقهبندی و تشخیص خطای بلبرینگ ها
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.