Effect of Asphaltene content on Gas-Oil interfacial mention
- سال انتشار: 1392
- محل انتشار: اولین همایش ملی نفت و گاز ایران
- کد COI اختصاصی: NIPC01_015
- زبان مقاله: انگلیسی
- تعداد مشاهده: 1478
نویسندگان
Department of petroleum engineering, Science and Research branch, Islamic Azad University, Fars, Iran
Department of petroleum engineering, Science and Research branch, Islamic Azad University, Fars, IranAssistant professor of chemical engineering
Department of petroleum engineering, Science and Research branch, Islamic Azad University, Fars, IranAssistant professor of chemical engineering
چکیده
CO2 injection was proved to be an effective method for enhanced oil recovery; Injected gas might have negative effect on oil flow in the reservoir as a result of asphaltene deposition and pore throatblockage during the process. The gas injection process may be miscible or immiscible, depends ontemperature, injection gas, properties of reservoir fluids and pressure. Maximum sweep efficiency is expected in miscible displacement process, which occurs above the minimum miscible pressure (MMP) while the other factors are constant. Zero surface tension represents the Miscibility.Thependant drop technique has been recently developed to measure the interfacial tension (IFT) between the injected gas phase and the reservoir oil at different pressures and reservoir temperature. In this paper, mutual interactions between each of two different synthetic oils and CO2 are experimentallystudied. Tow synthetic oils consist of 1.3 gr asphaltene and 3 gr asphaltene was used. First, a series of saturation tests are conducted to determine the onset pressure of asphaltene precipitation for each synthetic oil-CO2 system. Second, the equilibrium interfacial tension (IFT) between each sample andCO2 is measured as a function of the equilibrium pressure. It is found that the determined onset pressure is higher if the synthetic oil is heavier. It is also found that the onset pressure is a function of composition and asphaltene content.کلیدواژه ها
Minimum miscibility pressure, interfacial tension, asphaltene precipitation,asphaltene depositionمقالات مرتبط جدید
- محاسبه تخلخل و نحوه توزیع آن به کمک نمودار تصویرگر FMI
- تفسیر نمودار تصویرگر FMI به منظور شناسایی شکستگیهای دیواره چاه
- ارزیابی تاثیر تکانه قیمتی سوخت های مصرفی بر میزان مصرف
- بررسی تنشهای دیواره چاه و محاسبه فشار منفذی از نمودارهای چاهپیمایی معمول و تصویرگر FMI
- Chelating Agents and their role in enhancing carbonate rock dissolution: A critical Review
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.