Analysis of polygonal blocks forging by dual stream functions (DSF) application
- سال انتشار: 1392
- محل انتشار: هفتمین کنفرانس دانشجویی مهندسی مکانیک
- کد COI اختصاصی: ASCME07_057
- زبان مقاله: انگلیسی
- تعداد مشاهده: 879
نویسندگان
Mechanical Engineering Department, Isfahan University of Technology
Mechanical Engineering Department, Isfahan University of Technology
چکیده
In forging operations the prediction of metal flow is animportant consideration. Analysis of three dimensional metal forming processes are likely to takelong time and in some cases inaccurate. In this paper, a mathematical model using dual stream functions and the upper bound method have been proposed to examine theplastic deformation behavior in the open die forging of polygonal blocks between two flat dies. The material was assumed to be rigid–plastic. In mathematical modeling a kinematically admissible velocity field was suggested for the plastic deformation. The velocity fieldderived from the newly developed dual stream functions can automatically satisfy the volume constancy and the velocity boundary conditions. The non-uniform velocitywas derived for simulating the inhomogeneous deformation and the effect of barreling during the forging. Using the present model, various effects offorming parameter such as the friction factor, reduction, number of sides of the polygonal blocks, etc. Upon thenon-dimensional forging pressure, forging force and barreling of the blocks were analyzed systematically and the results compared with other researcher’sanalytical and FEM software results and are shown good agreement. Although this effect can be easily included in a finite element method, the demandingamount of memory and the computer time by this method is more economical than the FEM approachکلیدواژه ها
Forging; Dual stream functions; Upper bound method; Barreling effectمقالات مرتبط جدید
- اصول طراحی مفهومی پس سوز یک موتور توربوفن سنگین
- مطالعه تجربی و عددی توزیع ضخامت در فرم دهی افزایشی تک نقطه ای یک جسم مخروطی
- پیشبینی و بررسی ویژگیهای آیرودینامیکی پرتابه ای چرخان با استفاده از دینامیک سیالات محاسباتی
- تحلیل عددی کنترل جریان آشفته حول استوانه با استفاده از دو استوانه ی کنترلی دیگر
- مطالعه عددی اثر جایگزینی نیتروژن با دی اکسید کربن بر احتراق موتور دیزل
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.