CFD Modeling and Residence Time Distribution in a Two-Inlet One-Outlet Stirred Tank

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,096

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ASCME07_050

تاریخ نمایه سازی: 4 اسفند 1392

چکیده مقاله:

Two-inlet one-outlet stirred tanks are widely used in both small and large scale industries especially for dilution purposes. In this study, a computational fluiddynamics (CFD) model for simulation of a stirred tank was developed and evaluated experimentally. Two fluid flows with different physical properties were enteredinto a tank stirred by a six-blade turbine impeller. Multiple Reference Frame (MRF) technique and standard k-ε turbulence model in steady state form wereutilized to model fluids agitation in the tank. A user defined function (UDF) was also implemented fordefining flow viscosity. Moreover, unsteady state formwas used to analyze residence time distribution (RTD) in the tank. The simulation showed a successful andcomplete mixing of two flows corresponding to different inlets. Results demonstrated operational effects of turbine impeller on the fluid flow. Impeller forcedflows vigorously toward the tank walls and after stroke with walls, flows changed suddenly their rout and moved upward or downward; these violent motionsdeveloped a well-mixed pattern and consequently caused two fluids to be dispersed in the tank. In addition, RTD analysis proved that increase in impellerspeed makes the mixing process closer to the perfect agitation and reduces residence time discrepancies ofdifferent paths of fluids. This study makes it easier to understand flow behavior in two-inlet one-outlet stirred tanks and provides engineers with supplementary scale up information.

کلیدواژه ها:

نویسندگان

Afzal Karimi

Department of Chemical Engineering, University of Tabriz

Mostafa Aghbolaghy

Department of Chemical Engineering, University of Tabriz

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Ding, J., Wang, X., Zhou, X.F., Ren, N.Q., and Guo, ...
  • Patel, H., Ein-Mozaffari, F., and Dhib, R., 2010. "CFD analysis ...
  • Serra, A., Campolo, M., and Soldati, A., 2001. _ _ ...
  • Paul, E.L, Atiemo-Obeng, V.A, and Kresta, S.M., 2004. Handbook of ...
  • Behjat, Y., Shahhosseini, Sh., and Marvast, M.A., 201 1. "Simulation ...
  • Wang, X., Ding, J., Guo, W., and Ren, N., 2010. ...
  • Ring, T., Wang, B., and Sang-Choi, B., 2004. Predicting residence ...
  • Fluent-Inc., 2006. FLUENT 6. User s Guide. Fluent-Inc., Lebanon, NH. ...
  • Converti, A., Zilli, M., Arni, S., Felice, R.D., and Borghi, ...
  • February 19-21, 2013 _ School of Mechanicl Engineering _ University ...
  • 14% which implies adequacy of the simulation. C onclusions ...
  • نمایش کامل مراجع