Performance prediction of a rich gas condensate reservoir through material balance and PVT behavior-A Case study
- سال انتشار: 1384
- محل انتشار: دهمین کنگره ملی مهندسی شیمی ایران
- کد COI اختصاصی: NICEC10_373
- زبان مقاله: انگلیسی
- تعداد مشاهده: 2916
نویسندگان
Reservoir Engineer, NISOC
Senior Reservoir Engineer, NISOC
Senior Reservoir Engineering, NISOC
چکیده
With a 217 STB/MMSCF liquid-gas ratio (LGR) Sarvak reservoir of Zilaei field is one of the richest gas condensate reservoirs in the world. Due to asphaltene precipitation during well shut-in, it is not possible to acquire static pressure data for the reservoir. Since the reservoir pressure is of the main reservoir parameters for performance prediction, material balance calculations was performed based on volumetric and PVT data to determine current reservoir pressure. Furthermore the retrograde condensate deposition (liquid drop-out) is also calculated with the introduction of new parameter of Liquid-Fluid ratio (LFR). The curve of P/z (the ratio of pressure and gas deviation factor) versus cumulative gas production is conventionally utilized to predict the gas reservoir performance. This method is used for gas condensate reservoirs by replacing gas z-factor with two-phase z-factor (zT). Since reservoir pressure data are not available a direct usage of the above method for reservoir is impossible. As such the experimental data of Constant Volume Depletion Zilaei-Sarvak (CVD) experiment have been used that simulate the gas condensate fluid behavior. The experimental data are simulated using the PVT simulator of Winprop and tuned to EOS to provide non-available parameters and to check the validity of the Peng-Robinson data. Gas deviation factor at the dew point (zd) was determined as 1.1457 based on which the z-factor was calculated for different pressured below the dew point pressure. two-phase Backward calculation was performed to correct the available experimental data of produced gas percentage to reservoir conditions. The percentage of gas produced to reach the dew point was determined as 3.496 percent of the Gas Initially In Place (GIIP). Utilizing the GIIP of 620 MMMSCF concluded from volumetric calculations the reservoir will reach the dew point after 20.25MMMSCF of gas production. It is estimated that current reservoir pressure after cumulative gas production (Gp) of 60 MMMSCF would be 5931 Psia. Furthermore the retrograde liquid deposition of the reservoir is determined to be 31.5 MMSTB through the plot of liquid-Feed Ratio (LFR) versus Gp/G.کلیدواژه ها
Condensate, Material Balance, Retrograde liquid depositionمقالات مرتبط جدید
- نگاهی به نقش اقتصاد سیاسی ایران در مدیریت مصرف انرژی
- مقایسه روشهای نورتابی شیمیایی رادیکال *CH و *OH در استخراجپاسخ دینامیکی شعله جریان متقابل
- مطالعه عددی اثر تحریک جریان ورودی بر عملکرد یک انژکتور هممحور برشی تحت شرایط گذربحرانی
- مطالعه ساختار شعله متان هیدروژن در مشعل پیچشی سیدنی با استفاده از مدل احتراقی حجمی
- مطالعه تجربی اثر احتراق جریان چرخشی غیر پیش مخلوط بر پایداری، شدت تابش نور و دینامیک شعله پروپان - اکسیژن/هوا
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.