EFFICIENCIES OF SIEVE TRAY DISTILLATION COLUMNS BY CFD SIMULATION
محل انتشار: دهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,099
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC10_034
تاریخ نمایه سازی: 6 بهمن 1385
چکیده مقاله:
A 3-D two-fluid CFD model In the Eulerian framework was developed to predict the hydrodynamics, heat and mass transfer of sieve trays. Interaction between the two phases occurs via interphase momentum, heat and mass transfer. The tray geometries are based on the large rectangular tray of Dribika and Biddulph (AIChE. J., 32, 1864, 1986) and FRI commercial-scale sieve tray of Yanagi and Sakata (Ind. Eng. Chem. Process. Des. Dev., 21, 712, 1982). In this work a CFD simulation is developed to give the predictions of the fluid flow patterns, hydraulics and mass transfer efficiency of distillation sieve trays including downcomer. The main objective has been to find the extent to which CFD can be used as a design and prediction tool for real behavior, concentration and temperature distributions and efficiencies of industrial trays. . Despite the use of simple correlations for clasure models, the obtained efficiencies are very close to experimental data. The results was shown that
values of point efficiency has been varied with position on the tray, because of variation of affecting parameters, such as velocities, temperature and concentration gradients and interfacial area. Downcomer region shows a region of high gas holdup in the vicinity of weir, and affects the tray hydrodynamics and mass transfer efficiency. Especially in the systems with a high volatile component evaporation of light component takes place in the downcomer, as that observed in binary systems contain methanol. The simulation results are shown that CFD can be used as a powerful tool in tray design and analysis, and can be considered as a new approach for efficiency calculations.
کلیدواژه ها:
نویسندگان
Rahimi
Department of Chemical Engineering Sistan and Baluchistan University Zahedan, ۹۸۱۶۴ IRAN
Rahimi
Department of Chemical Engineering Sistan and Baluchistan University Zahedan, ۹۸۱۶۴ IRAN
Shahraki
Department of Chemical Engineering Sistan and Baluchistan University Zahedan, ۹۸۱۶۴ IRAN
Zivdar
Department of Chemical Engineering Sistan and Baluchistan University Zahedan, ۹۸۱۶۴ IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :