Flexural Performance of Composite Ultra-High-Performance Concrete-Encased Steel Hollow Beams
- سال انتشار: 1398
- محل انتشار: ژورنال مهندسی عمران، دوره: 5، شماره: 6
- کد COI اختصاصی: JR_CEJ-5-6_008
- زبان مقاله: انگلیسی
- تعداد مشاهده: 24
نویسندگان
Ph.D. and Instructor, College of Engineering, University of Missan, Missan,, Iraq
Department of Civil Engineering, College of Engineering, University of Missan, Missan,, Iraq
چکیده
Composite members have been widely used in the construction of medium- and high-rise buildings. The results of the development of a new structural member by experimental investigation of the flexural behavior of hollow composite beams are presented in this paper. This research aims to exploit the properties of composite sections and their strength in developing a new approach for overcoming the problems of service pipes in buildings. A hollow steel section encased fully in concrete is used to form a composite hollow beam. The structural benefit provided by the steel section (composite part) is adopted to increase the stiffness of the member. The hollow part is employed to provide services and economic benefits by reducing the amount of expensive ultra-high-performance concrete (UHPC) used and decreasing the self-weight of the member. The flexural strength of ۱۱ UHPC beams is tested under two-point loads. The variables in this investigation include the type of hollow core mold material and the size, location, and shape of steel hollow sections in the middle and tension zones of the cross-section. Experimental results are compared and discussed. The tested results show that the flexural capacity and stiffness of the UHPC-encased steel hollow beams are ۱۰۹% and ۲۳.۵% higher than those solid beams, respectively.Composite members have been widely used in the construction of medium- and high-rise buildings. The results of the development of a new structural member by experimental investigation of the flexural behavior of hollow composite beams are presented in this paper. This research aims to exploit the properties of composite sections and their strength in developing a new approach for overcoming the problems of service pipes in buildings. A hollow steel section encased fully in concrete is used to form a composite hollow beam. The structural benefit provided by the steel section (composite part) is adopted to increase the stiffness of the member. The hollow part is employed to provide services and economic benefits by reducing the amount of expensive ultra-high-performance concrete (UHPC) used and decreasing the self-weight of the member. The flexural strength of ۱۱ UHPC beams is tested under two-point loads. The variables in this investigation include the type of hollow core mold material and the size, location, and shape of steel hollow sections in the middle and tension zones of the cross-section. Experimental results are compared and discussed. The tested results show that the flexural capacity and stiffness of the UHPC-encased steel hollow beams are ۱۰۹% and ۲۳.۵% higher than those solid beams, respectively.کلیدواژه ها
Ultra-High Performance Concrete Hollow Beams Composite Beams Longitudinal Opening Position of Hole.اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.