Effect of Silica Powder on the Bond between Building Stones and Pumice Concrete
- سال انتشار: 1400
- محل انتشار: ژورنال مهندسی عمران، دوره: 7، شماره: 2
- کد COI اختصاصی: JR_CEJ-7-2_010
- زبان مقاله: انگلیسی
- تعداد مشاهده: 21
نویسندگان
Civil Engineering Department, Faculty Engineering Technology, Al-Balqa Applied University, Amman ۱۱۱۳۴,, Jordan
چکیده
The Concrete Backed Stone (CBS) masonry structures are common in many countries in the Middle East. The weak bond and heavyweight are two main problems facing such masonry structures. In this research, Pumice Lightweight Aggregate Concrete (PLWAC) containing silica powder addition is used in backing building stones. The main objective of this research is to investigate the effect of using silica powder addition on the bond strength between building stones and the PLWAC. An experimental program is conducted to investigate the bond strength by applying a direct shear load to the concrete-stone interface. The study investigated the effect of some parameters such as the silica content, the stone surface roughness, and the concrete strength on the bond between lightweight concrete and building stones. The stone roughness comprised specimens of saw-cut and grooved stones with different groove depths. Tests showed that the bond and the compressive strength of the PLWAC increased by increasing the silica content up to ۱۵ percent, where they start to decline. The increase in bond strength corresponding to ۱۰ and ۱۵ percent silica content was ۱۴ and ۳۳ percent, respectively. Increasing the stone roughness by about ۵۰ percent of the saw-cut surface area provided a full bond between the building stones and their backing concrete. Furthermore, the study offered a formula that estimates the bond strength and agrees well with test results. Doi: ۱۰.۲۸۹۹۱/cej-۲۰۲۱-۰۳۰۹۱۶۵۶ Full Text: PDFThe Concrete Backed Stone (CBS) masonry structures are common in many countries in the Middle East. The weak bond and heavyweight are two main problems facing such masonry structures. In this research, Pumice Lightweight Aggregate Concrete (PLWAC) containing silica powder addition is used in backing building stones. The main objective of this research is to investigate the effect of using silica powder addition on the bond strength between building stones and the PLWAC. An experimental program is conducted to investigate the bond strength by applying a direct shear load to the concrete-stone interface. The study investigated the effect of some parameters such as the silica content, the stone surface roughness, and the concrete strength on the bond between lightweight concrete and building stones. The stone roughness comprised specimens of saw-cut and grooved stones with different groove depths. Tests showed that the bond and the compressive strength of the PLWAC increased by increasing the silica content up to ۱۵ percent, where they start to decline. The increase in bond strength corresponding to ۱۰ and ۱۵ percent silica content was ۱۴ and ۳۳ percent, respectively. Increasing the stone roughness by about ۵۰ percent of the saw-cut surface area provided a full bond between the building stones and their backing concrete. Furthermore, the study offered a formula that estimates the bond strength and agrees well with test results. Doi: ۱۰.۲۸۹۹۱/cej-۲۰۲۱-۰۳۰۹۱۶۵۶ Full Text: PDFکلیدواژه ها
Bond Strength Pumice Concrete Building Stones Masonry Structures Lightweight Aggregates Concrete.اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.