The effect of pulsed laser welding variables on the residual stress of ۳۱۶L austenitic stainless steel using the Finite Element Method (FEM).
- سال انتشار: 1403
- محل انتشار: هفتمین کنفرانس بین المللی جوشکاری وغیرمخرب، بیست و پنجمین کنفرانس ملی جوش و بازرسی، چهاردهمین کنفرانس ملی آزمایش های غیرمخرب و سومین کنفرانس ملی ساخت افزایشی
- کد COI اختصاصی: INCWI25_107
- زبان مقاله: انگلیسی
- تعداد مشاهده: 88
نویسندگان
Master's student, School of Metallurgy and Materials Engineering University College ofEngineering, University of Tehran, Iran;
Associate Professor, School of Metallurgy and Materials Engineering University College ofEngineering, University of Tehran, Iran;
چکیده
In this study, a pulsed Nd:YAG laser welding machine was used for experimental tests, and SYSWELD software was employed for numerical investigation using a ۳D model for thermodynamic and mechanical analysis. The welding speeds of ۰.۵, ۱, and ۲ mm/s and voltages of ۴۴۰, ۴۶۰, and ۴۸۰ V were considered as variables in these experiments. Samples made of L۳۱۶ stainless steel with a thickness of ۱ mm were used. The simulation results showed a high degree of agreement (above ۹۰%) with the experimental results. Analysis of the experimental and numerical data revealed that the weld dimensions increased with increasing voltage and decreasing welding speed. Furthermore, with increasing welding speed and voltage, the heat distribution in the workpiece became more non-uniform, and the residual stress in the sample increased. Microhardness results also indicated that, in addition to the weld metal being harder than the base metal, increasing the welding speed and decreasing the voltage led to an increase in the hardness of the weld metal. This research demonstrates the influence of laser welding parameters on the properties of the workpiece and provides better insight and understanding of the parameters to achieve desirable properties, improve the mechanical properties of the part, and reduce residual stresses in the component using the finite element method.کلیدواژه ها
۳۱۶L stainless steel, laser welding, residual stress, Finite Element Methodمقالات مرتبط جدید
اطلاعات بیشتر در مورد COI
COI مخفف عبارت CIVILICA Object Identifier به معنی شناسه سیویلیکا برای اسناد است. COI کدی است که مطابق محل انتشار، به مقالات کنفرانسها و ژورنالهای داخل کشور به هنگام نمایه سازی بر روی پایگاه استنادی سیویلیکا اختصاص می یابد.
کد COI به مفهوم کد ملی اسناد نمایه شده در سیویلیکا است و کدی یکتا و ثابت است و به همین دلیل همواره قابلیت استناد و پیگیری دارد.